UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.


Operation: Unlock
Selected model: SM-J120F
Software version: 31.0


Waiting ADB device... OK
Reading phone info...
Model: SM-J120F
Android version: 5.1.1
Product code: SM-J120FZDDKSA
Phone version: J120FXXU2AQE2
PDA version: J120FXXU2ARA1
CSC version: J120FOJV2ARA2
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.300
Phone SN: R58J56QG0QN
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2018-01-01
RF cal date: 20170603
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: B0 DB 73 9D 44 29 CC 05 2F 82 99 D9 88 5E ED 94
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done


Done with Samsung Tool PRO v.31.0
برای دیدن لینکها
برای دیدن لینکها براي ديدن لينکها و تصاوير بايد عضو سايت و يا كاربر-VIP باشيد] کلیک کنید
کلیک کنید


موضوعات مشابه: